This website is intended exclusively for businesses and legal entities under public law.
Example · Automotive · ASOMv10

Simulation of a Wankel engine

A Wankel engine with a triangular rotor: ASOMv10 simulates the motion and shows the matching housing contour.

ASOMv10 with the Wankel engine: triangular rotor in the housing contour described by its apexes, in the center, the gear and ring gear, on the left handles marked in red, at the bottom constraints3:43
The task

One rotor, three apexes, one contour

The pinion on the housing and the internal gearing of the triangular rotor must maintain a constant ratio of 2 : 3. Nevertheless, it should be possible to change the eccentricity, the rotor size and the curvature of the flanks freely. The matching housing contour should result from the motion – exact or with an offset for an apex seal.

What ASOM shows here
  • The ratio of gear to ring gear stays constant at 2 : 3 with every change.
  • The trajectories of the rotor apexes form the housing contour – exact or with an offset for an apex seal.
  • Handles marked in red change the eccentricity, rotor size and curvature of the flanks – with the mouse or by entering a value.
Your benefits

Change the rotor shape, and the kinematics stay consistent

You change the eccentricity and rotor shape directly on the model; ASOMv10 keeps the system consistent and immediately shows the matching housing contour.

Nothing to adjust by hand

The system stays consistent with every change. More on constraints

Compare shapes quickly

A different rotor shape is set up quickly, and you see the matching contour immediately.

Switch the motion

You set up other motion sequences in the drive control by switching connections. More on motion sequences

More examples

Similar tasks

All example videos
1:15
Automotive · ASOMv10

Wankel engine variants

Rotors with three to six apexes compared, each with the matching gear ratio. The trajectories of the rotor apexes form the housing contour.

1:32
Automotive · ASOMv10

Piston of a two-stroke engine

At 6,000 rpm, inertia matters. ASOMv10 calculates the joint and bearing forces with connecting rod, counterweight and piston.

3:35
Basics · ASOMv10

Symmetrical six-bar linkage for a door

A six-bar linkage guides a door, with the joints arranged symmetrically. The synthesis is built from constraints alone, and the start and end positions remain adjustable.

Have a similar task?

Describe your mechanism to us. In an online demo, we will show you ASOMv10 using your example.

Request an online demo