This website is intended exclusively for businesses and legal entities under public law.
Example · Furniture · ASOMmini

Kitchen cabinet flap with spring support

Tension springs support a kitchen cabinet flap with a six-bar hinge. The example shows how you set the springs in ASOMmini for different flap weights.

ASOMmini with the kitchen cabinet flap: cabinet and flap as a DXF drawing, six-bar hinge with an energy storage element; on the right, the manual force, stroke and spring characteristic curve2:41
The task

Apply force first, then the flap opens by itself

The flap opens by 110° and is supported on both sides by tension springs with adjustable attachment points. The manual force curve has to suit flap weights from 2 to 8 kg: at first, force is needed to open the flap, and from an opening angle of about 15–20°, the flap opens by itself all the way.

What ASOMmini shows here
  • One element represents both tension springs. On its characteristic curve, the stroke range in use is highlighted in green.
  • The manual force element shows the force required at the flap. The drive rotates at 1°/s – so you read the diagrams directly as a function of the opening angle.
  • For each weight from 2 to 8 kg, the attachment point of the springs is moved until the manual force curve is right.
Your benefits

Set the springs before a prototype is built

You see the manual force curve over the entire opening movement and can tell exactly at which angle the flap starts to open by itself.

Fewer trials on prototypes

You find the right attachment point in the model, not by rehooking the springs on the prototype. More on force calculation

Define the adjustment range

You can see which attachment points you need to provide for light and heavy flaps.

With your drawings

The cabinet and flap are imported into the model as DXF drawings, and parts of them move along – the design is immediately easy to understand.

More examples

Similar tasks

All example videos
1:25
Basics · ASOMmini

Four-bar linkage with manual force

The manual force element shows in real time how the required manual force changes when you move the application point, a bearing or the center of gravity.

2:26
Fittings · ASOM

Door closer

How much force is needed at the handle or directly at the door? You model the door closer’s behavior in simplified form, without reproducing its inner workings.

3:57
Consumer goods · ASOMmini

Umbrella

A pressure spring between the sliders opens the umbrella by itself. ASOMmini shows manual force and joint forces in real time, even as you change the spring characteristic curve.

Have a similar task?

Tell us about your mechanism. In an online demo, we will show you ASOMmini using your own example.

Request an online demo